Cutting tools
From operation and material to a working tool system.
ExploreWALTER / MACHINING DIRECTIONS
Start with your operation.
Explore four processes. See what matters at the cutting edge.
Turning
Match the holder, insert and cutting geometry to your material and the stability of the setup.
Selection focus
Material · geometry · chip control
In practice
Shafts, shoulders and rotationally symmetric components.
Cutting contact
Discuss this operationThe insert meets rotating cylindrical stock. Check tool access, edge support and chip flow at this contact.
Milling
Choose the cutter and inserts around the surface, cutting depth, engagement and machine conditions.
Selection focus
Engagement · depth · rigidity
In practice
Faces, shoulders, pockets and contoured surfaces.
Active cutting edges
Discuss this operationThe cutting inserts work around the rotating cutter body. Engagement and toolpath determine which edges remove material.
Hole making / drilling
Start with the hole diameter, depth and tolerance, then check tool access and the required hole quality.
Selection focus
Diameter · depth · hole quality
In practice
Through holes, blind holes and preparation for subsequent finishing.
Bore entry
Discuss this operationThe drill approaches along the hole axis. Check entry conditions, chip evacuation and coolant access through the full depth.
Threading
Select the process around thread type, pitch, material and the stability of the machine and tool.
Selection focus
Thread type · pitch · process
In practice
Internal and external threads, with the method matched to the drawing.
Thread profile
Discuss this operationThe repeated helical profile is the functional surface. Confirm thread form, pitch, tolerance and usable thread length.
SOLUTION PARAMETERS
What matters for your job
01
Walter Tools is the metal-cutting tooling direction; distinguish it from other Walter brands and woodworking tools.
02
Cover turning, milling, drilling/holemaking, threading and inserts by specific operation.
03
Selection needs material, geometry, diameter or depth, machine interface, rigidity and required tool life.
04
For an analogue request, send the current tool code, component drawing and actual cutting conditions. Availability and lead times are confirmed separately.
Official source ↗Checked 09.09.2026 · The parameters of each delivery are defined in the agreed specification.
Official source
Next step
Turning tools
External and internal machining of shafts, bushings and profiles.
ExploreHORN
Start at the cutting edge. HORN Tools for metal-cutting operations and technical selection.
ExploreLet's discuss your task
A drawing, material and machining objective are a good starting point.
Explore